I have a 1991 chevy 4 wheel drive 2500 and when I turn to the right it pops really bad on the passenger side. Especially in 4 wheel drive.

I have a 1991 chevy 4 wheel drive 2500 and when I turn to the right it pops really bad on the passenger side. Especially in 4 wheel drive. 1 Answer

do I have a full floating rear end on a 2000 k/2500 3/4 ton chevy pick up truck it has a 5.7 vortex engine in it? 4 Answers

I need to know what rear end I have in my truck in order to purchase the correct drums for it

I have a 1989 Silverado with a remanufactured tbi, new injectors, new Russell performance stainless line, an6 fittings, new ac delco fuel pump, new fuel tank and I'm only getting 6 psi at my Tbi. I have an adjustable fuel pressure regulator and new diaphragm and spring. When I kink the return line it jumps to 14psi. No kinks in the lines. Please help. 3 Answers

I have a 1989 Silverado with a remanufactured tbi, new injectors, new Russell performance stainless line, an6 fittings, new ac delco fuel pump, new fuel tank and I'm only getting 6 psi at my Tbi. I ...

1990 chevy 2500 2 wheel drive, stalls out on take off 1 Answer

1990 chevy 2500 2 wheel drive, stalls out on take off

We have a 1993 Chev 2500 4x4 5.7L, we changed out the wiring harness, now changed the whole distributor, cap and rotor, put motor to TDC and it still not start. It will turn over but not start. 1 Answer

changed wiring harness, distributor, rotor and cap it will turn over but not start. With the spark plug wires, where do you consider #1 on the distributor?