I can't get the top bolt off the fuel filter,I got bottom undone,but can't get the top one off

I can't get the top bolt off the fuel filter,I got bottom undone,but can't get the top one off 1 Answer

The Bottom of the piston connection is loose on crank? The bolts are still in tact nor broken from what I can see.. 2 Answers

Heard a loud tapping noise like something was loose in the oil pan so I removed it and rotated the assembly.. pushed on the bottom of each piston cap an they all were tight an didn't budge but one...

what to do about a stripped crankshaft pulley bolt do i go up to the next size bolt 2 Answers

i retapped the hole with 12mm tap but the bolt is sloppy doesnt seem to tighten properly and i dont know if a helicoil is strong enough to fix this problem or is there another solution>

1987 rear brake lights stay on with the ignition switch off. 4 Answers

The brake lights stay on with the ignition switch off and all lights turned off. What causes this? I was informed that it is the micro switch for the brakes. If so, where is that located?

car was running fine, recently inspected, hit a pot hole, immediately after the car died & now it won't start or even crank over..how do i troubleshoot...can't afford a shop, need a DIY fix 2 Answers

checked the battery, the gas, car has power (radio/lights), thought maybe the connection to the starter was loose, but i took out the smaller of the 2 wires (cliped) to the starter and re clipped it -...