I have a 2004 Pontiac Grand AM and the ignition switch has to be replaced along with the key lock cylinder, so my question is do i have to replace the steering wheel column as well?

Asked by Ben Jan 08, 2015 at 03:40 PM about the 2004 Pontiac Grand Am SE2

Question type: Maintenance & Repair

30,130

mikeatpriestlake answered 9 years ago

you shouldn't have to, these should be replaceable parts. get yourself a Haynes manual it should give step by step.

Mark helpful

Your Answer:

I have a 2004 Pontiac Grand AM and the ignition switch has to be replaced along with the key lock cylinder, so my question is do i have to replace the steering wheel column as well? 1 Answer

2004 Pontiac Grand Am SE2

-

Maintenance & Repair
How do i compress the sterring wheel to the column on a 1987 pontiac grand am tilt wheel? 2 Answers

I took off my steering wheel on a 1987 Pontiac Grand AM to change the ignition switch. I put it all back together right, but now I can't get the steering wheel back on do I need a tool or kit to put...

1987 Pontiac Grand Am LE

-

Maintenance & Repair
I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those it started doing this. I replaced the cam position sensor and also the engine coolant temp sensor and it didnt help. I was thinking of replacing the ignition coil packs and housi g but not sure if that would fix it. There are no check engine lights or stored codes . 4 Answers

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those...

1999 Pontiac Grand Am 4 Dr SE Sedan

-

Maintenance & Repair
I have a 1998 grand am with a leaking slave cylinder. Will this motor come out with a manual tranny or do I need to drop the subframe? 1 Answer

Im getting ready to do this in a couple days and Im hearing differing opinions on whether or not I can do this job without dropping the tranny. I want to do a water pump at the same time so Im wonde...

1998 Pontiac Grand Am 2 Dr GT Coupe

-

Maintenance & Repair
I have a pontiac grand am 2005 and had the ignition replaced. It started for a while then it quit starting. It wont even turn over. The battery and alternator are good. What can it be. 1 Answer

I had the ignition replaced and the sensor monitor checked out fine. The battery and alternator are good. The car wont even turn over when I try to start it.. Got a jump and it didn't work.

2005 Pontiac Grand Am SE

-

Maintenance & Repair

Own this car?

Share your experience with others.

2004 Pontiac Grand Am

Write a car review

Review another car

Used Pontiac Grand Prix

5 Great Deals out of 193 listings starting at $1,288

Used Pontiac G6

13 Great Deals out of 319 listings starting at $1,990

Used Ford F-150

6,050 Great Deals out of 131,250 listings starting at $900

Used Toyota Camry

1,955 Great Deals out of 34,773 listings starting at $500

Used Pontiac Bonneville

53 listings starting at $2,895

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I have a 2004 Pontiac Grand AM and the ignition switch has to be replaced along with the key lock cylinder, so my question is do i have to replace the steering wheel column as well?

1 Answer

Your Answer:

Own this car?

Share your experience with others.

Shortcuts

Search Pontiac Grand Am Questions

CarGurus Experts

Know more, shop wisely

Related Models For Sale

Used Cars for Sale

I have a 2004 Pontiac Grand AM and the ignition switch has to be replaced along with the key lock cylinder, so my question is do i have to replace the steering wheel column as well?

1 Answer

Your Answer:

Related Questions