jeeps running rough after replacing crankshaft sensor,cam sensor,dist cap & rotor,plugs & wires why?

jeeps running rough after replacing crankshaft sensor,cam sensor,dist cap & rotor,plugs & wires why? 1 Answer

Rough idle smoking after running a while 6 Answers

cranked up it runs fine but after running for 30 minutes it will have a rough idle and smoke

Issues resolving P0340 Cam Shaft Position Sensor Code 1 Answer

I drive a 2011 Jeep Grand Cherokee with the 3.6 V 6. My CEL came on about 3 months ago with the code P0340 "Cam Shaft Position Sensor." I replaced the right Cam Shaft Position Sensor and the light w...

what does the cranking sensor do 5 Answers

jeep cranks but will not start, plugs, rotor, cap, coil all new but still will not start.

2002 Jeep Grand Cherokee 4.7L after sitting for sometime it starts. Go to the store park it come out crank but no start. changed crank sensor 2 times cam sensor ones and PCM. last time it did it checked the code said cam sensor again. My friend said mybe coil packs?? has 160,000 miles e mail rockon4025@yahoo.com 1 Answer

2002 Jeep Grand Cherokee 4.7L after sitting for sometime it starts. Go to the store park it come out crank but no start. changed crank sensor 2 times cam sensor ones and PCM. last time it did it che...