Brake Drum Puller ???

0

Asked by Manitoba Mar 09, 2012 at 06:12 PM about the 1964 Volvo PV544

Question type: Maintenance & Repair

Hi Guys; Brake Repair procedures indicate that you require a brake drum puller. Please explain the need for the puller. (very expensive tool) Are you not able to back off the shoes, remove brgs, and remove the drum ???
Thks Len

315

- Report

zoneman answered about a year ago

A proper wheel puller is necessary because the hub of the rear brake drum is splined to the axle shaft. After a period of time these splines rust enough to freeze the drum to the axle. The proper puller uses the wheel lugs as the attachment point therfore it won't warp or break the drum. Don't try to use a puller that grabs the rim of the drum, as this will ruin the drum. Good luck with it.

Mark helpful

Your Answer

how to remove stuck brake drums on front of 1960 willy's C J 5 1 answer

back edge of brake drum is not accessable to use a standard puller

1960 Jeep CJ5

-

Maintenance & Repair
How to remove front wheel bearing 2 answers

need puller or not...

1999 Chevrolet Cavalier 2 Dr STD Coupe

-

Maintenance & Repair
How do you get the rear drums off on a 66 catalina 3 answers

Bought a 66 catalina that sat for eight years. The rear drums seem to be oxidized to the axles

1966 Pontiac Catalina

-

Maintenance & Repair
1990 Pontiac Grand AM Rear Brakes 5 answers

Have brake fluid leaking from the driver side rear brake but can not remove the drum. Brakes went out so I'm sure the cylinder has gone out. Brake drum is frozen to the wheel bearing assembly. Brake s...

1990 Pontiac Grand Am 4 Dr SE Sedan

-

Maintenance & Repair