Electrical behind glovebox
I need to know what electrical is behind my 85' dodge d150's glove box. The blower doesn't come out of the front vents and I noticed there was a 4 wire connecter (male) unplugged.
11 views
1980 Dodge D-Series Reviews, Pricing & Specs
Write a reviewOur experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
User reviews for 1980 Dodge D-Series
Write a reviewUser rating:
by Anonymous
Jan 07, 2011
tough truck mine was granny geared and had a steel
plate mounted in the back with the big dana
posi-traction rear end and towing package this
truck was built like a tank it had the bigest non
hemi v8 in it that dodge had to offerJan 07, 2011
by Jay R
Oct 31, 2010
this truck is equiped with a slant six 225 and single barrel carb making it ok on gas but lacking horsepower. it has no traction and stability what so ever and way to light and stiff in the rear of the truck. although this truck is stylish it is not meant to be a performance truckOct 31, 2010
by Nathan T
Jan 15, 2010
since this thing dont have 1984 i guess ill put it here. 1984 Dodge Ram D250. 360 engine bored .40 over edelbrock intake holley 750 double pumper true custom deul exhaust mopar performance headers big camshaft pretty much everything done to engine except stroking kit and nos. Est. 500hp 700 ft.lb. torque. Get Sideways! o ya and it weighted 7000 lbs. and still smoked everything out thereJan 15, 2010
User rating:
by Anonymous
Jan 07, 2011
tough truck mine was granny geared and had a steel
plate mounted in the back with the big dana
posi-traction rear end and towing package this
truck was built like a tank it had the bigest non
hemi v8 in it that dodge had to offerJan 07, 2011
by Jay R
Oct 31, 2010
this truck is equiped with a slant six 225 and single barrel carb making it ok on gas but lacking horsepower. it has no traction and stability what so ever and way to light and stiff in the rear of the truck. although this truck is stylish it is not meant to be a performance truckOct 31, 2010
by Nathan T
Jan 15, 2010
since this thing dont have 1984 i guess ill put it here. 1984 Dodge Ram D250. 360 engine bored .40 over edelbrock intake holley 750 double pumper true custom deul exhaust mopar performance headers big camshaft pretty much everything done to engine except stroking kit and nos. Est. 500hp 700 ft.lb. torque. Get Sideways! o ya and it weighted 7000 lbs. and still smoked everything out thereJan 15, 2010
by Weston W
Oct 31, 2009
Well My 1981 Dodge Ram D150 4x4 Short bed stepside with a 318 not stock with a 8 inch lift kit with 35 inch mud tires, so ya i love to go out driving my truck with my friends. I Just Love This Truck I Will Never Sell ItOct 31, 2009
by Richard K
Sep 29, 2009
my truck is bad ass. thats all. my truck goes 0 to 60 in about 7 seconds with the 360 bored and stroked. 727 auto trans. 205 transfer case. dana 60 rear. 44 front. freakin thing is totally awsome dude.Sep 29, 2009
by Steve S
Jan 25, 2008
What a POS. It was given to me by a former co-worker - and now I know why. I took it hoping it could be a worthwhile project. There wasn't a thing on it that would make it worth saving. It was so bad the Kidney Foundation wouldn't even take it. Sold for Scrap.Jan 25, 2008
by Jason F
Dec 21, 2007
$500.00 k-car, all i could affordDec 21, 2007
What users have asked
My 1985 Dodge Ram D-150 With a 318 will turn over and fire but will not start
Why is it when I turn the key to crank the Vehicle the truck fires and then dies when key goes to run ?
26 views
Electrical and fusible links
Hi everyone, I am in the process of replacing some fusible links in my 1984 dodge d150 318/auto. I am replacing where it comes off the battery the splits into 4 separate fusible links. The wires are ignition feed, ignition switch feed, battery feed, and alternator charge wire. Since I'm replacing with fuses I'm wondering what amp fuses I need for each one. Also do I need a mega fuse for the main wire feeding the 4. If so what size. I plan on replacing with jcase or slow blow fuses.
405 views
1982 dodge d150 restoration
I’m in the beginning stages of restoring my uncles old dodge. He brought it brand new and it’s still running. If anybody knows any good part websites that can get me going I would appreciate it. Also it’s has a Kabul transmission, slant v6 3 speed with overdrive. I’m not sure of the gear pattern so if anybody could help me figure that out
195 views
change a distributor on a dodge d100
How do i change the distibutor on my dodge d100 I have new spark plugs and distibutor cap and rotor just need to change the distibutor and ibhave never changed one before so kindve lost lol
375 views
Top Comparisons
Have you driven a 1980 Dodge D-Series?Compare this car