GMC Yukon Questions Maintenance & Repair
Why Won’t My Truck Initially Move In Drive Or 3rd Gear?
Truck will shift into all gears fine but won’t initially accelerate in drive or 3rd gear. It will move in 2nd or 1st and once up to speed I can shift it into drive or 3rd and it will accelerate.
Misfire 2009 Gmc Hybrid Yukon
Changed every sensor, spark plug and coal pack still has a misfire and it hesitates does anyone know how to fix this issue?
2007 Yukon Denali. Drivers Side Heat
Drivers side heat works when remote start is activated. When starting car with key and pressing buttons it does not.
How Do I Find My Misfire?
I have a 2003 GMC Yukon. I have misfires on 1,3,5,&7. I have good compression, spark, and injector pulse. I checked injector balance and all injectors flow the same. It has a 4.8 V8. Can anyone tell...
DVD Speaker Not Working
Dear DVD came with wireless headphones. I would prefer to use the speaker that's on the DVD player but no sound comes from it. Suggestions?
Rear End Swaps Will They
Seeing if Chevy express van and Yukon rear end swap
Why Is The Right Side Passenger Side Heat And Ac Not Working
during day time its hot outside and the right side blow hot while ac is running on and then later at night outside is start chill and I turn temp up to warm while ac is running and then right side blo...
2010 Yukon Oil Gauge At Zero
We have a 2010 GMC Yukon Denali 8 cylinder. After driving for about 25 minutes turned car off for a child drop off started engine and check engine light came on, oil gauge at zero but oil pressure w...
Where To Start On Likely Seized Motor
Driving home from work, oil pressure gauge went down, pulled over with in 50 ft, turned it off. I then discovered oil cooler line popped at factory crimp, oil all over the place, got it towed home....
2011 GMC Yukon Slt 5.3 Cranks But Won't Start
So I have a 2011 GMC Yukon SLT with the 5.3. I've had no issues with the vehicle whatsoever up until today I went to go start it, noticed the check engine light was on and all it would do is crank ...
Why Doesn't My Truck Crank After 2 New Ignition Coils?
I have 08 Yukon Denali 6.2L w/ 177k. Few weeks ago I replaced Cylinder 1 and 7 ignition coils. Today 90 degree weather. I used my auto start. Ran an errand and came back home. Went to crank again ...
Does Anyone Know Any Good Tips On How To Fix L99-06 Yukon Cylinder 7 Misfir...
Ok i got cylinder #7 misfiring. She has 334,000 miles and is still running good but I hate when it starts misfiring. Anybody with any good tips for the yukon even if they have nothing to do with ...
2007 GMC Yukon Denali Gear Light Not Working
All of a sudden gear light won’t turn on. Everything else works fine.
Service Suspension System
"Service suspension system" just came on on the dash. Can I still drive? Can't be seen at the shop till next month and I've got places to be.
2015 Yukon Bright Lights Not Working
light comes on the dash but they do not swicth at the head light
Slow Filling Gas In 2008 Youkon
I have blown through all lines, replaced fuel module, and evap canister. Still having problem filling gas tank. Keeps kicking off pump.
Stability System Disable
Why is my brake light on and the stsbility system disabled.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.