Ford F-250 Questions Any type
- Recently Active
I've been to several dealers in my area and they all give me 3/8 x 16 x 1 9/16 bolts. they are too long by about 1/4 inch. Also, right above the upper bolt, there is a missing bolt. It holds the be...
it cranks but wont start has fuel is it possible to some how I moved the timing
Put a new cpu in it new cap and rotor , new fuel pump, ignition module, tried practically everything I could think of and still haven't fixed the problem
When I turn on the all wheel drive switch to either hi or low the wheel goes off in different directions and the tires don't follow and the car fells like its gonna stall, it worked fine a year ago....
I will probably need a new front drive shaft be cause my truck may be longer. But will the suspension be compatible on my frame?
It will only run for about a mile before I have to pull over sniff let it sit do it will run properly
1969 F250 Highboy with a 390 and 750 weber/carter carb manual of course w/ granny tranny
I am having problems with my 5.8 it did not want to run after starting i installed plugs with gap of .044 along with new cap and rotor. Now it is harder to start and will die out after starting. I c...
This is a low miles truck one owner and the problem just started a couple days ago. You have to pump the acc to get it to start and then to get it to run you have to feather the pedal.
1986, just out of the shop and was starting and running great. Before it went to the shop, solenoid clicked. Now, nothing. Help!
its a 2004 f250 with a 6.0 engine
Favorite this topic
Subscribe to Ford F-250 questions.
Search Ford F-250 Questions
Ford F-250 Experts