Ford F-100 Questions Any type

What Amp Do I Need For My Fuel Electric Pump On A F100 1982

my husbands truck keeps going out on us. he cleaned the screens but that doesnt seem to be the problem and the fuses we keep blowing throw too so i am confused and just trying to find a way to help m...

What Is Causing My Carb To Smoke?

I own a 1967 ford F100 with the six cylinder. Its got a carter one barrel and I was wonderin what would make it smoke? Could it be needle and seats? Leakin float, too high fuel pressure? What could it...

Does Anyone Make Re Popped Roofs?

i have a lot of rust above my drip rail and i was curios if there was a company re popping the roofs or if ill have to weld up all the cancer

What Can I Do About A Brake Bleeder Thats Stripped Off On The Front, Passan...

Didn't do the right thing. I didn't take the grease zerk off and take the bolt for the grease chamber off to get onto the bleeder right away and ended up stripping it off. Can't get on it with anythin...

Need A Diagram Of Where The Hoses Go To The 2 Bbl Carb On A 1980-302 Cc F-1...

Fuse Panel Diagram

I am desperately seeking a diagram of the fuse panel for a 1980 Ford F100. The diagram has long since worn down, & is no longer decipherable.

Would You Buy A Ford F100 For $3500

It looks like a very nice truck. I would like to purchase it. But in your opinion what could I resell it in this condition? It has 51000 miles on it. Please respond back. If you want to see more pics ...

F 100 Transmission

I would like to know what a three in the three, straight six transmission is. Any answers?

A/T Tranny Swap

I would like to upgrade my 3spd A/T to a O/D A/T. Does anybody no what will fit and what model years can be used ???

A/T Tranny Swap

The 3spd A/T is on a "300" 6cyl. I want to move up to a O/D A/T for better highway fuel mileage.

Starter. I Need Help.

I have a 1967 Ford F100, the starter started to drag and I put a different starter in it. When I turned it over, it'd catch on the flywheel for a bit, and then kick off, what could be the issue? When...

What Does A 1984 FORD F100 TAILGATE LOOK LIKE?

Hello,I have a 1984 Ford F100. The tailgate does not have FORD embossed across it and so I beleive that the tailgate was not genuine. However, I have been told that this model did not have FORD embo...

Help?

Can anyone get me a video on how to replace the wheel cylinder on a 1967 Ford F100 passenger, rear? Please and thank you! I can't seem to find one anywhere.

What Do You Call The Valve On The Exhaust Cross Over?

I have a 1956 F100 PU with 272 engine What do you call the valve on the exhaust cross over? There is lever & spring coil valve at 8 o'clock position in this exhaust cross over! What's it called and w...

How Reliable Is A 1968 Ford F100 With An F-series 300 Motor?

I'm 16 and about to get my license, and I've always wanted a classic truck, specifically a 68 Ford F100. Lately, I've been questioning how reliable an old car like this might be. I'm paying for it my...

I Want Restore A Ford F100, 1962

i want to contact with some companies where i can buy all the new parts that i need. For all the mechanics parts, like engine tramsmission, etc, i wnt to use all new technology and for the body i wa...

I Am Planning To Increase My Wheel Size To 17 Inches. Will I Need To Chang...

1974 F100 XLT With 460. So far all stock with engine modifications...headers and iinternals.lb

Different Wheel Size Front To Back

did any 1978 f100 xlt long wheel base, come with different wheel sizes. i have just purchased one and rear are smaller than front. previous owner did not know why

How Hard Is It To Rebuild A Carb?

I was wondering how much of a pain in the ass it is to rebuild a Carter One barrel Carb. Any information on this subject would be great. It has manual choke if that makes the difference.

Would Anyone Be Willing To Give Me A Link To The PROS AND CONS Of A FOMOCO ...

I was wondering if anyone could give me a link to the PROS and CONS of a Fomoco carb. Because I cannot find it and I've been looking all day. If anyone could even tell me a little more about it, that ...