Ford Bronco Questions Maintenance & Repair
Need To Fix My Harmonic Balancer For My 1995 Bronco
i have a huge rattling in my engine found out its the harmonic balancer i need help fixing it any sugestions
1983 Ford Bronco. Need Some Help!
Bought a 1983 Ford Bronco, Full Size, earlier this year. The problem I am having is that it runs and drives well for maybe a good ten miles or so. Upon these ten miles or so, it feels as if the enging...
I Am A Bronco Fan From Way Back...im On My 3rd One ...
i moved to ks..about 2yrs ago.am having hard time finding parts 4 my 88 bronco here....is there any one close to great bend ks...area with any body parts .or can set me in the direction i need ot go...
Gas Gauge Reads 1/8 Full When Truck Is Off And Reads Empty When Truck Is On...
i have a 94 full size bronco and when the truck is off the gas gauge reads 1/8 to 1/4 full when i turn the truck on it reads empty and this happens no matter how much gas is in the truck i tryed to fi...
1978 Ford Bronco Emissions And Smog Pump
I just purchased a 1978 Bronco with a 351m engine. I need to put the smog air pump and all other items that go with it so it will pass the visual test for smog. This vehicle is in California. I have a...
Bronco Top Mounting Screws?
i have a 1990 Full Size Eddie Bauer Ford Bronco. and i am looking for the 15 mounting screws for the removable top. i have searched everywhere, including Ford themselves, and have had no luck! if any...
Turning Over
My '95 bronco takes a few seconds to turn over, but starts every time. It has a 5.8L 351 Windsor. Does anybody know what the cause could be?
DOES ANYONE KNOW WHERE I CAN GET A SET OF 31X10.50 R15 TIRES
I NEED A GOOD SET OF 31 INCH TIRES
Headlight Covers And Rear Window Motor
I was wondering if anyone knew any tricks to keep my headlights from fogging up and if it would be easier to replace them somehow with newer clear covers instead of the original headlights. Also i was...
Ford Bronco Gas Mileage?
I have a 1981 ford bronco I brought back from the grave. It is a 300 Straight 6. I was wondering if I should get a newer more efficient carb or stick with original carb that came with it? The carb i...
OEM Front And Rear Axles.
Can I find the axle sizes and gears with the VIN? I am guessing the rear is 8.8? or 9"? Front not sure Dana 35? It is a 1981 300 straight six 4spd granny gear. Anything?
Gear Shifter Stuck?
gear shifter won't go past reverse
Gear Shifter
gear shifter will not go past reverse, can't get to neutral or drive?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.