Chevrolet Chevelle Questions Maintenance & Repair
How Do You Bleed The Air From A Power Steering Pump
after installing a rebuilt pump it has no power and assume it is due to air in the unit and lines
Motor Oil Capacity
Is there a 396 enjine that needs 6 quarts of oil? When filling enjine with 5 quarts of oil it still shows 1 quarts low on dip stick,
My 69 Chevelle Starter Has A Grinding Sound
just wondering if i need a new starter or what to do to stop the grinding sound when turning
Does Anyone Know The Specs For Placement Of SS Stripes For 1970?
does anyone have the size and placement specs for 1970 SS stripes?
Looking For Parts
were restoring a 69 ss chevelle and were looking for the vinyl top molding kit for the vinyl top. if anyone has any info where to purchase that would be great. jessica.and.mike@hotmail.com were also l...
How Do You Take Of The Front Dash Panel Were The Gages Are?
how do you take off the gage panel on the 1969 chevelle there must be a little trick or somthing after you take off the radio and the other things i still need too do somthing else?
I Have A 69 Sedan Tat Came With A V8. Is It Worth Restoring? I Have Been To...
it is a 2 door post chevelle, 300 sedan i believe. it has a framed door with a vent window on it, a post pillar, and it seems to be shorter and weighs a lot less than the sports coupe. it had a v8 in ...
Front Sway Bar Bushings 1970 Chevelle SS 396
Rebuilt the front suspension of my 1970 Chevelle SS 396. Cannot find front sway bar bushings 1 1/18" diameter. Everyone wants to sell me the 1" bushings which are too small. Any suggestions? I have ch...
Will Rear Control Arms From A 1972 Chevelle Work On A 1973 Chevelle?
will rear control arms off of a 1972 chevelle fit on a 1973 chevelle?
Where Is The Power Steering Pump Located?
I need someone to tell me where the power steering pump should be on a 1971 chevy chevelle malibu. A picture of an origonal engine woul be great someone HELP!
Where Can I Find Rubber Seals For A 4 Dr Malibu 1973
hard to find parts around doors and trunk i also need to find chrome moldings around wheel welds and a piece that im missing on the rigth hand side by the bumper i believe its called a bumper filler.
Z16 Front Spindles
Part # for Z16 front spindles
Engine Specs
what are the 400 engine specs? How much HP? What is the Compression Ratio? What are the mechanical Engine Specs? What is the vale size? Which cylinder heads came on the car?
95 Bonneville
where is the power steering pump
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.