turns over to long before starting, dies wile driving every so often, replaced cam and crank sensors have code 340 cam sensor

turns over to long before starting, dies wile driving every so often, replaced cam and crank sensors have code 340 cam sensor 1 Answer

Truck dies 2 Answers

Truck dies while driving but can start it right back up and drive for a while and dies again. Just not too long ago had a fuel filter and fuel pump replaced on it. Anybody know anything?

P0172 and P0175 after mass air flow sensor replacement 2 Answers

So after getting code P0171 I replaced my faulty mass air flow sensor on my 2010 nissan frontier v6 4.0 and that fixed that code problem. But after a day of driving I got codes P0172 and P0175 anyo...

2000 nissan frontier 3.3 vehicle starts and runs but dies like it runs out of gas 2 Answers

vehicle dies after a short drive time. sometimes two miles, sometimes up to ten miles. after sitting about five minutes will start and go a few more miles before stopping again. i have replaced the...

P0605 code 1 Answer

Have a 2005 Nissan Frontier that threw a P0605 code when I was driving. Truck went into fail safe mode which resulted in immediate power loss, no to limited acceleration. Also noticed that I had som...