My 2002 Mazda 626 seems to be overheating a little. Last night I tried to fill it with antifreeze but It had enough so I'm pretty sure it's the engine there is plenty of oil and when I started the car back up, The steering wheel was giving me major resistance. I couldn't drive it I waited and waited eventually it turned but I'm sure this will happen again. Does anyone have a specific answer for my problem I would gladly appreciate your help?

My 2002 Mazda 626 seems to be overheating a little. Last night I tried to fill it with antifreeze but It had enough so I'm pretty sure it's the engine there is plenty of oil and when I started the car back up, The steering wheel was giving me major resistance. I couldn't drive it I waited and waited eventually it turned but I'm sure this will happen again. Does anyone have a specific answer for my problem I would gladly appreciate your help? 1 Answer

i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i want to turn it from red(heat) to blue(cold), but it just swings freely. i think something must be broken. i tried to pull it out, but its hopeless. i don't want to break something else. the reason i'm asking this is because my heater is not working and this little problem might or might not be the reason. thanks for your help. 1 Answer

i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i wa...

I have a Mazda 626 and it is overheating and when I put water into the radiator it won't fill up 1 Answer

I have Mazda 626 and it is overheating when the car is hot I put water into the radiator and it geysers out. When the car is cool and been standing some time it will not fill up, it just keeps runni...

i have a 200 mazda 626 just rebuilt the trans now if i put the shifter in low or revers it pulls but if i put it in 2nd or drive it dont and there is no codes 5 Answers

i got the care with the trans out of it i rebuilt it know it will pull in low and revers but it will not pull ot all if the shifter is in drive or 2nd there is not any codes in it and i dont think it...

My 98 mazda 626 lx 4cylinder died out and won't start back up it cranks but don't roll over, I changed the spark plugs with the spark box, changed the crank shaft position censor and has a new battery 3 Answers

I ran a diagnoses and no codes showed up and the smell of gas comes when I try to start it could someone help please