I have changed the coils rebuilt the carburetor... I have even changed out the ignition starter switch... still will not start.

I have changed the coils rebuilt the carburetor... I have even changed out the ignition starter switch... still will not start. 1 Answer

won't start... 2 Answers

I have a Chevy c10 I have changed the coils... I have check both the starter and the alternator. I have even changed out the ignition starter switch. And it still will not start. Need some guides.

I have a 1971 C10 with a 3 speed on the column. I can put the shifter in all 3 gears and reverse but when I let out the clutch the truck does not want to move until i accelerate and increase the RPM. 3 Answers

As far as I know the clutch is good. There is no noise or odor that indicates to me the clutch is bad, but I don't know for sure it could be I'm no expert on clutches. How can I know for sure if it ...

in need of serious help i have a 1979 chevy 350 truck. i replaced the distributor cap, rotar, ignition coil, ignition coil module, starter, and spark plugs any help on his would be amazing im pretty s 3 Answers

in need of serious help i have a 1979 chevy 350 truck. i replaced the distributor cap, rotar, ignition coil, ignition coil module, starter, and spark plugs any help on his would be amazing im pretty s...

I am working on a 1975 chevy 10 van,I have replaced the brake booster, master cylinder both rear wheel cylinders and bled all the brakes. 6 Answers

Now when driving excessive force is needed to stop the van. Any Ideas where to look next