CVPI Engine/Trans Swap

As long as both engines are the same 4.6 the 2007 should drop right in 2001. You may have to swap some wiring harnesses but it should be an easy change over.

Yes, both are 4.6. The plan was to move All harnesses from the 2007 (Wrecked) to the 2001 because of Emission requirements.

Good planning. Should be a fairly easy swap.

Make sure you grab the ECM too.

transmission wont work. pcms different.

What about the steering wheel and column?

must use the 2001 items. cant mix 01 and 07 parts. engine will work if bare 07 long block is outfitted with 01 components. oil pans same on both. use either intake but must use 01 tb and tb spacer to intake. use 01 wiring pcm and harnesses. use 01 injectors also