Ignition coil COP

Ignition coil COP 1 Answer

I replaced my spark plugs and the ignition coil boot isnt very tight around the spark plugs, it it still ok or could I wrap a little electrical tape around the ceramic part to get a tighter fit

Ignition coil 2 Answers

I changed all 6 coils but it’s still misfiring what else would be the problem ?

changed ignition on 2007 chrysler 300, but the ecm is not reading,what to do 1 Answer

key will turn all the way i have radio dash lights but no start

Ignition coil 1 Answer

1 and 4 on the ignition coil is not getting no fire I have replaced engine coil in the same thing is happening any suggestions?

2008 chrysler300 Put the plastic key in the ignition and turn to start. There is a delay before the starter engages 4 Answers