I have a 2002 5.9, can't get the bolt off of the back of my tensioner, what size bolt is that and is it reverse thread? (since the bolt is mounted on the tensioner)

I have a 2002 5.9, can't get the bolt off of the back of my tensioner, what size bolt is that and is it reverse thread? (since the bolt is mounted on the tensioner) 1 Answer

I have a 2007 Dodge Ram 1500 SLT with the 4.7. The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with the engine knocking. Is it possible that the 1/4" difference in length caused the pistons to strike the longer, incorrect plugs hence, that caused the knock? The shop admitted to me that the wrong plugs had been ordered. When asked if it was possible that they may have installed the incorrect ones, they told me that the thread size wasn't the same. Well, truth be told, it is the same size thread. Thanks for any input! 2 Answers

The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with th...

I got a 98 dodge 1500 with a 360 in it what do I have to do to put a 310 in it I know it will bolt to the training but what kind of wiring issues will I have 2 Answers

I got a 98 dodge 1500 with a 360 in it what do I have to do to put a 310 in it I know it will bolt to the training but what kind of wiring issues will I have

Can't get alternator back on the mount 1 Answer

The Aleve where the bolt goes in on the back of the alternator is sticking out about 1/16 of a inch and I can't get it on the bracket

How to get bolt out of motor or is it safe to drive? 1 Answer

I dropped the bolt that holds camshaft positioning sensor in the hole were the sensor goes? I have tried to fish it out and no luck.By looking at videos online and where I think it fell I think mig...