i have a 2001 chevy express cargo van that had the fuel pump go bad and i replaced and when i got done installing it i turned the ignition on to test to make sure it worked it wasn't getting power

i have a 2001 chevy express cargo van that had the fuel pump go bad and i replaced and when i got done installing it i turned the ignition on to test to make sure it worked it wasn't getting power 1 Answer

I am putting the drum on a 1500 2002 Chevrolet Express and I can not get the drum back on it is to tight and the adjuster is all the way in how come it doesn't go on easy like it is supposed to 1 Answer

I am putting new breaks on the rear have adjuster all the way in and can not get the drum on it is to tight

I have a 2005 Chevy Express Van, where does the OBD II connecter get the power for "pin 19"? Mine is not "hot" as it should be. 2 Answers

I am trying to get my ScanGauge II to work (it plugs into the OBD connecter) but "pin 19" of the OBD connecter which is supposed to be "hot" is NOT. All of the fuses seem OK–– where does the OBD ge...

I have a 2005 Chevy Express 3500 and the #7 fuse keeps blowing when the break is pressed. Any ideas? 1 Answer

The fuse blows every time i press the break pedal and or use left turn signal.

how do i change the brake light bulb on a 98 chevy cargo van 2 Answers

bulb burned out,,,can't see how the cover comes off