WILL A 2003 COBRA PINION FLANGE FIT MY 2001COBRA SOLID REAR

check spline count and ground hub diamiter newer pinion yolks use a flange with a 2 inch piolet wich is cool because you can upgrade ujoints 20 yrs exp with drivelines

thanks. the new flange should let me use a regular 1350 u joint. is there anything else i should know when taking the old pinion flange off.

your length might be diferent to i did a trouch driveline and changed it from a 2 peice to a 1 peice with no problems at all

giv me a call 6029970906

I BOUGHT THE DRIVE TRAIN THROUGH MPSAUTOSALVAGE IN Georgia. they included a new drive shaft. i called them about the pinion flange, they sent, fit it today. will count the splines. thanks.

if you have any problems with the length or the slip yolk ford makesm about 30 diferent sizes in the c4 yolk make sure seal diamiter is right and yolk goes all the way in you should have an inch and a half sticking out when bolted up

thanks, will let you know