what does it mean when a code comes up- manufacturer controlled transmission?

0

Asked by nosweat24 Jul 16, 2012 at 01:10 AM about the Lincoln Navigator

Question type: Maintenance & Repair

24,205

- Report

Tom answered 10 months ago

Usually this is caused by a sticking valve in the valve body on the transmission, are your 1-2 shifts harsh? If it just started happening, then have to fixed right away, you don't want to burn out your clutches. Also, how old is the tranmission fluid, is it red or brown?

Best Answer

Mark helpful

Your Answer

No speed in my hot rot lincoln ? 5 answers

my 01 is having a major chugging Problem , driving at town speed 50mph it looses power and speed, i push down on the gas peddle ans the rpm's go up the vehicle revs but it wont increasing in speed it...

2001 Lincoln Navigator Base 4WD

-

Maintenance & Repair
can you use a 1999 licoln navigator transmission on a 2003 lincoln navigator 1 answer

2003 Lincoln Navigator

-

Maintenance & Repair
Can I use Lucas transmission fix on my 06 navigator? The tranny seems to slip at 45 -50 mph 3 answers

2006 Lincoln Navigator Luxury 4WD

-

Maintenance & Repair
trouble code meaning 18 answers

I have a 94 town car with that is giving me code 636...transmission oil temp sensor voltage to high or to low. what could be causing this?

1994 Lincoln Town Car

-

Maintenance & Repair
check transmission error and gas smell 10 answers

When driving over 65 mph for over 40 miles, check transmission error. After error, if you have to stop, the car shifts hard from 1st to 2nd. Doesn't happen all the time. Also bad gas smell. Can't...

1999 Lincoln Continental 4 Dr STD Sedan

-

Maintenance & Repair