My truck has new plug wires, plugs, and new cap and rotor along with a new coil but it still wont fire?
Asked by biggbuck144 Feb 19, 2013 at 03:15 PM about the 1986 Dodge RAM 50 Pickup
Question type: Maintenance & Repair
i cannot figure it out can anyone help
5 Answers
does this have a ceramic resistor on firewall? if so thats it ,jump over it to check,then replace it its their for a reason
check with a test light on coil possitive side and see if power is going to coil and if so check the negative side as you crank motor over if so then it sounds like the pick ups inside the distrtibutor would be bad.
biggbuck144 answered 11 years ago
have done all that and had my mechanic check the omhs on the distributor and the coil im not getting fire out of coil thats why im wondering if its the ecu
its the ignition control module. if you ever have any problems with no spark or no fire. you always need to right away check the icm
