My turn signals and break lights work just fine but my hazards dont work.. when i turn the hazards on the only one that works is the right front one.. i replaced all the fuses but still no luck...

My turn signals and break lights work just fine but my hazards dont work.. when i turn the hazards on the only one that works is the right front one.. i replaced all the fuses but still no luck... 1 Answer

My Dodge diesel 6.7 was running good and when I came home from work, shut off and 2 hours later I went to start and the engine turns over, but will not start. I thought it was a fuel problem, so loosen injector and turned over and had fuel. I tried to run engine analyses and nothing. It appears there the electrical has shut down, but the engine still turns over. Are the fuel injectors electrically pulsed or by pressure form pump? The only thing that come up is check gauges. No engine light at all. 2 Answers

Turned truck off and about 2 hours later, tried to start and the engine turned over, but would not fire up. I checked to make sure it had fuel at the injectors and it did. Are the injectors controll...

my turn signals work in the front of my truck but not on the rest of truck and suggestions 1 Answer

02 2500 Dodge brake lights work turn signals or emergency blinkers to not work. All fuses are good, I replaced the turn signal switch. What is my next step? 2 Answers

I have a 1998 dodge ram with a cummins and my cruse will not ingage .the light indicates it is on but it will not go on cruse 5 Answers

I have a 1998 dodge ram with a cummins and my cruse will not ingage .the light indicates it is on but it will not go on cruse