how do I take the old carrier bearing off the drive shaft?

how do I take the old carrier bearing off the drive shaft? 1 Answer

I took the drive shaft off but I could not get the bearing off.

how do you get the old carrier bearing off the drive shaft? 5 Answers

how do I get the window handle off? 1 Answer

Trying to remove window handle off to repair.

Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from under the truck.I looked around and couldn't see anything visibly wrong.I started it up again just fine and started rolling in 1st gear, then I tried to shift to 2nd the truck just stopped and wouldn't go into any gear.At this point the truck will start but when I let the clutch out, it dies(in neutral). Had to remove my drive shaft to be towed on towrope because it wouldn't roll smooth in neutral. When the engine is running now I don't feel any vibration through the gearshift anymore like how I used to before it broke down. What could it be? 3 Answers

Was rolling in 5th gear going 60, heard aloud screeching noise and it threw us forward in the seat and slowed it immediately to about 40.I pulled off to the side of the road and smoke was coming from...

How do I remove the steering wheel on a 1991 Chevy S10 Base 2 wheel drive? 3 Answers

The Haynes manual states remove the bolts from the back of the steering wheel with a 7mm socket. I am not finding a 7mm bolt head.