im doing a v6 to v8 swap and changing the tranny to a 350 turbo on a 81 camaro. do you have to cut or get a new driveshaft to do this?
4 Answers
If it had a turbo 400 in it, it will have to be shorten if you put a long tail housing in it. 3 1/2 inchs If you but a short tail it will be close but would still have to messure. What trany did you have in it to start with?
its all stock so i believe its a Saginaw 3-speed with the original v6. thanks
measure the trans and it will tell you if you need a long or short tailshaft 350
