model's that interchange disc brakes

model's that interchange disc brakes 2 Answers

i have a 1970 chevelle with drum brakes. what other models and years will work.

i have a 1968 CHEVELLE/MALIBU Bone stock 307 4 wheel drum. 2 barrel carb. Should i do an engine swap and change the brakes to disc? Would a manual trans be a bad idea? 5 Answers

i want a 383 with manual transmission and full brakes all around or 700-r4 but people tell me to keep it original.

will a 1966 or 1966 olds cutlass interchange parts with a 1966 chevelle 1 Answer

I am looking for the support piece under the rear trunk panel. It has to be cut from the back of the car. I found a cutlass but do not know if this will work. If anyone knows where I can find what I...

i got a problem i have a brand new turbo 400 rated for 1000 hp and the aftermarket distick tube wont fit in the hole and the stock one will fit in the whole but the tab that bolts on the bell housing is off. cam take the stock one and cut the spot welds then move it where i want in then weld it? 2 Answers

Building dream car 7 Answers

So..I want to take this car. And put this engine in it. And supercharge it. And everything else I can without blowing it. Of course. I'm gonna need suspension. A really good cutting torch and weld...