dear sirs, I have a problem with my mitsubishi 2003. I experienced that rpm sometimes fall to about 200~300 and this cause the engine to shake. This looks like that ignition is failing but if you press the gas pedal the engine rpm increase and vibration will goes out. What I do is to stop the engine momentarily and then restart, this action will turn back the engine to normal. I have already replace the spark plug, high tension wire and the cam sensor. But the problem still sometimes appear. What could be the problem and remedy? thank you

dear sirs, I have a problem with my mitsubishi 2003. I experienced that rpm sometimes fall to about 200~300 and this cause the engine to shake. This looks like that ignition is failing but if you press the gas pedal the engine rpm increase and vibration will goes out. What I do is to stop the engine momentarily and then restart, this action will turn back the engine to normal. I have already replace the spark plug, high tension wire and the cam sensor. But the problem still sometimes appear. What could be the problem and remedy? thank you 2 Answers

I drive a mitsubishi lancer and of late it has been flashing the neutral light (auto) and has no power once dat happens what do u think could be the problem... i serviced the transmission but it still 3 Answers

I drive a mitsubishi lancer and of late it has been flashing the neutral light (auto) and has no power once dat happens what do u think could be the problem... i serviced the transmission but it still...

I have owned my 2008 lancer for 3 months and the front tires have the back wheel wells all chipped up, What can I do? I have the bumper to bumper warranty! 4 Answers

Even if they fix it, it will do it again. It is a defect in the car. But I love it, Is there any way they can put extra protectant on my paint job. Or is it even worth it? The whole bottom side of my ...

after replacing the ignition switch on my 2003 Mitsubishi Lancer, the door remote control stopped working, the chime goes off when the drive's side is open without the key on the ignition, and the roof light stopped dimming when doors are closed. It all started when my mechanic replaced the ignition switch, but he says it has nothing to do with that. Any help would be greatly appreciated :) 5 Answers

2003 Mitsubishi Lancer electrical problem after replacing the ignition switch

I think my 2009 Mitsubishi Lancer timing belt is slipping or broke. What are the signs if this is the problem? 2 Answers

Started hard, rev high, now turns over but wont start.