WHAT THE PUPORSE OF THAT BUTTON YOU PRESS AND THE WORD HOLD WIL APPEAR ON DASH

Asked by FOXKGOTSO Feb 11, 2013 at 09:56 AM about the 2001 Mazda MPV

Question type: Car Customization

29,015

- Report

DavidH25 answered 3 months ago

It has to do with the OBD, not sure quite what..looking...... but if you answer please it would be to your benefit..where? Describe the button? I am not going to go search without information I need but am happy to help. IF you answer

Mark helpful

30,345

- Report

tenspeed answered 3 months ago

The HOLD light indicates the driver has selected NOT to allow the car to shift into a higher gear (i.e., 5th gear -also called Overdrive). It is mostly used when driving uphill when the driver wants to prevent the car from shifting into a gear that is too high and possibly could cause the engine to lug (over-strain).

Mark helpful

Your Answer

1992 mazda mpv high rpm at idle 2 answers

Hello, Happy New year. The RPM at idle in my 1992 Mazda MPV keeps reaching 2300. It drops to about 1500 when in Drive and with brakes firmly pressed in. But when in Park or Neutral it reaches 2300 or...

1992 Mazda MPV 3 Dr STD 4WD Passenger Van

-

Maintenance & Repair
WHY DOES MY MAZDA DEMIO SHOWS HOLD ON LIGHT AFTER TIMING BELT WAS REPLACED? 1 answer

2001 Mazda Demio

-

Maintenance & Repair
2002 Milly S with 52k miles. ABS/Brake/TCS/TCS Off/ Hold lights on steady. 1 answer

2002 Milly S with 52k miles. ABS/Brake/TCS/TCS Off/ Hold lights on steady. Speedometer/odometer stopped working at same time lights came on. Done so far: replaced VSS sensor. Checked/cleaned all groun...

2002 Mazda Millenia 4 Dr S Supercharged Sedan

-

Maintenance & Repair
how do you operate the cruise control. Each time i go in the car should i depress the o/d button on the shifter (once i do this, on the dash o/d off lights up) thanks look forward to answer 3 answers

I have air conditioning, but a 1.5 liter, is that right?

1996 Mazda Protege 4 Dr LX Sedan

-

General
I own a 1999 Mazda millenia and my power tilt wheel is not working. When I push the switch I can hear it clicking but the wheel is stuck in the up position. What should I check first? 2 answers

I own a 1999 Mazda millenia and my power tilt wheel is not working. When I push the switch I can hear it clicking but the wheel is stuck in the up position. What should I check first?

1999 Mazda Millenia 4 Dr STD Sedan

-

Maintenance & Repair

Looking for a Used MPV in your area?

CarGurus has 739 nationwide MPV listings starting at $1,300.

#1		ceprise Reputation 140
#2		littlehorn Reputation 130
#3		Shandi91 Reputation 120

WHAT THE PUPORSE OF THAT BUTTON YOU PRESS AND THE WORD HOLD WIL APPEAR ON DASH

2 Answers

Your Answer

Related Questions

1992 mazda mpv high rpm at idle 2 answers

WHY DOES MY MAZDA DEMIO SHOWS HOLD ON LIGHT AFTER TIMING BELT WAS REPLACED? 1 answer

2002 Milly S with 52k miles. ABS/Brake/TCS/TCS Off/ Hold lights on steady. 1 answer

how do you operate the cruise control. Each time i go in the car should i depress the o/d button on the shifter (once i do this, on the dash o/d off lights up) thanks look forward to answer 3 answers

I own a 1999 Mazda millenia and my power tilt wheel is not working. When I push the switch I can hear it clicking but the wheel is stuck in the up position. What should I check first? 2 answers

Shortcuts

Search Mazda MPV Questions

Mazda MPV Experts

Related Models For Sale

Used Cars For Sale