There is only you do it or you don't. You have to locate everything that connects the engine to the car. Use tape and permanent markers to label everything so when you go to put it back together you leave no screw/bolt/nut un-accounted for. If you don't - you have done all that work for nothing. Or - just hook a chain and a bobcat to it and rip that sob out of there. lol No- don't do that 2nd opinion on 2nd thought ;_)
Easiest way to get the engine out
2005 Mazda MAZDA3
-
Maintenance & Repair
Could someone please, maybe give me the steps on what comes out first and what to do in order of taking the engine out of That Mazda 3 2005 sp23 edition? Please great help, need to get it back on th...
2005 Mazda MAZDA3 Special Edition
-
Maintenance & Repair
AT light, engine light and traction control light come on. Automatic transmission, but car switches gears and bucks. Also intermittent clunk sound with newly replaced struts
2007 Mazda MAZDA3
-
Maintenance & Repair
why my car engine stop while driving on high way may it increase temp of engine but gauge not shown, when we stop for 5 to 10 mnute again it works.you you suggest any good advice.
Mazda MAZDA3
-
Maintenance & Repair
I only drove about 2 miles before I noticed plums of white smoke coming from my exhaust. I turned around and drove it back. I drained all the oil and replaced it with the correct amount. It seems to ...
2006 Mazda MAZDA3 s Touring
-
Maintenance & Repair
2005 Mazda MAZDA3
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.