Fuse for Tail lights on Escape Hybrid
Asked by Moonshae Mar 12, 2011 at 07:06 AM about the 2009 Ford Escape
Question type: Maintenance & Repair
I got pulled over the other evening because my tail lights were out, although my headlights were on. I'm sure it's a simple fuse issue, so I don't want to bother going to the dealer. I've misplaced my owner's manual, which I'm sure has a diagram. So, can anyone provide me with a fuse map or tell me specifically which fuse I need to check?
Thanks.
7 Answers
pull the fuse cover off,look inside it (cover)it has a lable for the fuses they are numbered and will tell you which is the tail light fuse.also in fuse box the fuses are numbered,easy to find the one you looking for.
this is not true for my 2008 ford escape hybrid. What is really maddening is the owners guide has a chart of the fuse panel with number and corresponding use of fuse. There is a fuse for everything ,BUT a tail light. the fuse cover has the numbers that correspond to the users guide chart but does not help unless there is a fuse designated as TAIL LIGHT. Now earlier in the users guide, there is an a graph for tail light bulbs , but nothing on the fuse.
i have same problem on 2011 which fuse is it?
fleshdweller1 answered 9 years ago
I just had the same with my 2008 nothing in the book, pulled all the fuses found 1 bad #22 park lamp that was the one. good luck all of you.
#22 park lamp fuse was my issue for Tail Lighrts not light up. Thank you!! :)
I had the same problem. #22 15A fuse was blown. Replaced it with a new fuse; blew again - immediately. :( Now trying to figure out what's shorting the circuit.
Was the #22 fuse under hood are inside beside console
