2002Dodge Stratus2.4L stalled,scanned& cam position sensor poped up, replaced & now still won't start.replced plugs thought might be flooded out. Still won't start . Has Dohc.

0

Asked by Ricky Jan 27, 2013 at 08:48 PM about the 2002 Dodge Stratus

Question type: Maintenance & Repair

225

- Report

tommcmanis answered 3 months ago

Check ecm connections,these and neons are notorious for poor connections. The ecm is loccated under hood behind left front head light.unplug all three connections (grey) let ecm sit for five minutes. Get back to me and let me know if that works

Mark helpful

425

- Report

Robert answered 3 months ago

when you replaced the sensor did the code clear it self?

Mark helpful

Your Answer

2000 Dodge Stratus just died 4 answers

I have a 4 cyl 2.4l DOHC with 172,000 miles. Changed the oil on Sunday and on Tuesday it died while driving down the road after approx. 1 mile. I tried to let it sit and restart but to no avail, it ...

2000 Dodge Stratus SE

-

Maintenance & Repair
Where is the TCM on a 2004 Dodge Stratus? 2.4L DOHC 3 answers

I can't seem to locate the TCM on my father's stratus. I thought it would be close to the PCM, by the fuse box but I can't seem to find it.

Dodge Stratus

-

Maintenance & Repair
MIssing when A\C is on 1 answer

The engine is a 2.4L Dohc. I can feel the it miss when the A/C is on.

2003 Dodge Stratus ES

-

Maintenance & Repair
Power steering pump belt 4 answers

What bolts do I have to loosen to replace my power steering belt? I have a Dodge Stratus 2.4 DOHC.

2002 Dodge Stratus SE

-

Maintenance & Repair
Why would my 2003 dodge neon sxt be stalling? 23 answers

I have recently replaced the fuel pump system, the cam shaft positioning sensor and the throttle positing sensor. Car stalls upon deceleration and acceleration from an idling position but obviousl...

2003 Dodge Neon 4 Dr SXT Sedan

-

Maintenance & Repair