Ram 1500 v6 won't start
I had to replace the alternator, it died while driving and I had to get it towed. It would run while hooked to a jump but as soon as you removed it the truck stopped running. I replaced the alternator. After I did that it started right up and ran. I turned it off and charged the battery throughout the next 24 hours. The following morning I try to start it to go to work and I get all the normal lights and no start. Not even clicking. red security light and the ]lightning[ are on. I checked the fuses, and they are all good. I swapped around the relays with no results. If i bypass the starter relay the engine turns over. I have a neighbor with a scan tool and I pulled the codes, they are in the attached image. The u1197 can mean the WIN module, PCM, or TIPM. There are a few posts that I have seen that point to the WIM module being troublesome and that's probably it. I would like to be more certain.
