Dodge Ram 50 Pickup Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered
bathtubman
0

1987 Dodge Ram 50 With New Belts And Lined Up Right , But Will Not Start

I have put new belts on my ram 50 with a 2.0 . All marks are lined like the book says so why want it start.

13 views with 4 answers (last answer 2 weeks ago)
boggeddown
0

1987 Ram150. Starts Well, But When Cold Won't Take Gas, Boogs Down, Unless ...

1987 Doge Ram 150. always easily starts. when cold, won't take gas. Just boggs down when I give it gas. must allow engine to build up rpms almost on it's own, which is very slow. 75 % of problem ...

21 views with 1 answer (last answer 3 weeks ago)
bathtubman
0

How To Get A Fuel Pump On A 87 Dodge 2.0--

i can't get the arm or shaft to rase up far enough to slip the pumps lever under it ?

15 views with 2 answers (last answer about a month ago)
taka1313
0

No Start, Has No Spark Or Pulse

has power to distruibtor and ground but has signal come out , replaced distruibtor twice,still no spark , has power to injector just no pulse,think my ecu is good may just aother bad distrubtor.

bathtubman
0

My Truck Is Not Getting Gas To The Carburater ???

I put a new fuel pump, blew threw the lines, cleaned the tank Rebuilt the carburater.The motor runs while i spray starter fuel in it. It has very little gas in the filter at the tank. Please help Th...

28 views with 2 answers (last answer about a month ago)
llorac57
0

I Need Diagram Of The Cluch Pedal Assembly

13 views with 1 answer (last answer 3 months ago)
sg23
10

Why Is My A/t Temp Light Always On?

I have a 1988 dodge ram 50 4x4. Recently while driving the a/t temp light came on. after letting it cool down and light went off it came on about 20 miles down the road needless to say i let it s...

60 views with 6 answers (last answer 6 months ago)
Cheryl Lenzer
0

Where Are The Marks That The Timming Gears Line Up With On A 1989 Dodge Ram...

I am changing the timming belt.

31 views with 1 answer (last answer 8 months ago)
MatiasMikels
25

Is The Mitsubishi Engine In My Dodge D-50 Have A Zero Tolerance Engine

Dodge D-50 YEAR: 1989 REASON: broken timing belt

210 views with 1 answer (last answer 11 months ago)
orson
0

Back Brakes Lock Up

RH grease seal,, brake booster, master cyl. has been changed out. When brakes applied,back wheels lock up .

166 views with 2 answers (last answer about a year ago)
1 2 3 4 5 next

Favorite this topic

Subscribe to Dodge Ram 50 Pickup Maintenance & Repair questions.

Search Dodge Ram 50 Pickup Questions

Dodge Ram 50 Pickup Experts

#1 Hettboy
Hettboy
Reputation 1,140
#2 dodgecummins
dodgecummins
Reputation 290
#3 LouB
LouB
Reputation 110
View All

Related Models For Sale