Ok so I tried to solder the loose connection on my instrument cluster on my 2001 GMC Sierra. I ended up making the whole board not work, no biggie I'll just get another, but I went to drive it and my truck moves fine in reverse but in forward it takes a lot of gas to move the truck, any help on this?
I recently switched motors in my truck, I pulled the motor from my 1999 gmc sierra 1500 and dropped it into a 1998 gmc sierra 1500. The motor turns over but it wont ilde, what would cause this to happ...
1999 GMC Sierra 1500 SLE 4WD Extended Cab LB
-
Maintenance & Repair
I have a 97 GMC Sierra and it will not start. Battery seems fine but when I turn the key all I get is a click. I believe it is the starter but I am not sure
1997 GMC Sierra 1500 K1500 SL 4WD Standard Cab SB
-
Maintenance & Repair
Hey every one I have a 4 speed manual tranny with overdrive..its a 89 gmc sierra 1500 v6 4.3l and Im trying to figure out what tranny i have in it. I went to a chevy/gmc forum and they said an 89 15...
1989 GMC Sierra 1500 C1500 Standard Cab LB
-
Maintenance & Repair
Drove my 2007 gmc sierra to work this morning ran just fine come to the lot after work it starts and idols just fine push the gas pedal and absolutely no power on my dash screen it says engine redu...
2007 GMC Sierra 1500 SLE1 Ext. Cab 4WD
-
Maintenance & Repair
Have A 97 GMC Sierra the brake lihgts wont come on!! at first they would not turn off. So we put new brake switch in. that work then they would not come on. so we changed the circuit board and put a...
GMC Sierra 1500
-
Maintenance & Repair
2001 GMC Sierra 1500
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.