Asked by normanl Jan 31, 2014 at 04:25 PM
about the Ford E-150
Question type: Maintenance & Repair
how to get to carburetor
11 months ago
Open hood, remove air cleaner tubes and box. Go inside and remove center console /doghouse.
Just filled the 36 gallon gas tank, and drove it home. Now it doesn't start. Spray starting fluid into the air filter, and it runs for a few seconds. The fuel pump fuse and relay are good, and when...
1997 Ford E-150 STD Econoline
Maintenance & Repair
As I mentioned a while back, I have a 1983 Crown Victoria LTD. It's got a 5.0, but I've also noticed that it says CFI. I know that CFI means Central Fuel Injection, but I'm still wandering if that m...
1983 Ford LTD Crown Victoria
the motor run and stop immediately as if carburetor is dirty, stay runing only with accelerator in.
1988 Ford Festiva
Does a 2001 ford bantam 1.3 (carburetor model) have a timing belt or chain?
2001 Ford Bantam
An after market carburetor has been installed the vacuum lines were cut and plugged now I want to put the original system to it. Right now it drives but dies out quickly.
1986 Ford F-150