Pontiac GTO Questions Car Customization
- Recently Active
looking to put a 06 gto motor in my 1967 camaro and was wondering if the motor and trans fit
I bought a set of Lower Frame mounts from Ames #N245B and they are different heights by about 1/2". I want to know why and which one goes on Passenger side of the car.
I have a 66 GTO and it came with a 455 cid, one of the engine mounts was broken, so I didn't think much about it, now that I'm rebuilding the engine I saw that the mounts don't line up, I have the s...
I have distortion in all speakers and have replaced the head unit. Still had distortion with new unit.
Replacing 1968 GTO convertible doors and windows with 1969 doors and windows.
I own a '65 GTO and had to rebuild the original Carb, after 48 yrs, then discovered cracks in the carb.decided to purchase new carb / aluminum intake. and suggestion? note: I am a weekend cruiser and...
I want to port and poshish the heads all the way to gasket match witch is 1 7/8. I am putting a .624 cam, Long tube 1 7/8th headers, 3 inch true duals, and a dual cold air intake. Does anyone know wh...
There's no repo's for my 71 gto rear bumper support brackets.
The engine is a 474 cubic inch built to 575HP. the headers are almost touching the frame and a frame mounts.
I want to remove drive belt the runs my ac compressor. I live in washington and rarely use the ac. I am thinking this might free up just a tiny bit of power? but will it have any adverse affects?
Any suggestions on how i can get the most bang without spending to much?
Favorite this topic
Subscribe to Pontiac GTO Car Customization questions.
Search Pontiac GTO Questions
Pontiac GTO Experts