Packard Clipper Questions Maintenance & Repair
- Recently Active
I have a 2008 Toyota Highlander, and the check engine light and VSC light came on three days ago . I took the car to Firestone to have the codes run in the codes are P0300 description is random ...
I've got a stock 2002 grand prix gtp. It's running like crap and is only making 3 to 3.5 psi according to the boost gauge. No cel or anything. Makes very little power. My buddy has a Buick le...
2012 Volkswagen CC...97k mileage. Car cranks but will not start. Battery is good. Fuel pump? Sensor? Help...
My fan will only blow out of the main dash vents no matter what setting the ac is on. It will not switch to defrost or feet vents. Would this be the air mode control motor or possibly a fuse??
Hi i just bought my chevy cobalt used from a private owner. And the check engine light just came on the car is not running anymore. what do i do?
I have a 1991 Dodge stealth Es Automatic DOHC. The car will start right up but upon acceleration the car will sputter and has little to no power. Any help? Thanks
When reseting security what happens if light stay on
2009 Silverado optional 6 transmission seems to only go into reverse changed filter fluid checked connections best I could no gear went out before the other just all together at once
I have a 89 F150 with a in-line 6 and 5 speed transmission. The transmission is the F2TA KA CO66495 and I found a new transmission which is the F2TA KA A747426. My question is will the A7 bolt up ...
I want to purchase this truck it's a 1997 Chevrolet Silverado 4 wheel drive 5.7 L Vortex seller states it needs torc converte What would it cost me for a torque converter and installation
the theft system light on the dashboard is blinking & my car won't start. It was running fine & starting right up all day. Does anyone know what I need to do? I tired disconnecting the battery & i...
Alright, so I had a noisy lifter in my '98 ZJ 4.0, so I got down in there and replaced it. Replaced all the gaskets from the head up, every bolt was diagrammed and replaced, got some new head bolt...
Won't start out in low but can manually put it in low to start out speedo and tack work I've replaced ignition switch and all ground straps could my vss be going out
I drive a 99 grandmarquis i crank it in the mornings and i literally have to turn it over 8 times for it to start I changed spark plugs and coils so when it's crunk it runs good then I go to turn o...
I changed my fuel pump and reset button and my ford truck still won't start. What else could be wrong
Search Packard Clipper Questions
Packard Clipper Experts