Jeep Liberty Questions Any type
- Recently Active
Has anyone heard of a bad windshield replacement where the adhesive glued shut the distribution box door causing it not to function
My 2003 Jeep Liberty sort of bounces. I just got it and have only driven small cars. Is this something I should be concerned about?
Changed engine now won't start...checked for fire and it only fires every six or seven revolutions.then will pop like out of time
Changed engine now won't start...checked for fire and it only fires every six or seven revolutions.then will pop like potty of time
M 26 is the location of the particular fuse that said - Power mirror switch, Power window switch in the manual. It is isolated mainly to drivers side door, meaning the passenger side can power that wi...
Where is the shifter cable for 4wd located on a Jeep Liberty 2002? I was recently told - after the cable disconnected - that the bushing was no good and that I would have to buy another cable to f...
Just had a new engine put in and drove it a week when ECT light and serv4wd light come on(2009Jeep) The ac and heater surge is that from the ECT?
Can I use doors from a 2003 Jeep liberty on my 2004 Jeep liberty
both are 3.7l v6's
I have gotten tons of "I am interested in your vehicle" contacts, but the contactors ask no questions, provide no contact information, etc. I've also received two automated offers from users who as...
I was driving down the road and then all of sudden when I pushed the gas it wouldn’t go the rpm just shot up pretty fast but I wasn’t going anywhere. I coasted down the road for a minute turned a c...
My Jeep liberty is slipping n the code is reading p0700 which says trans axle system malfunction. What sensors do I need to replace?
I was driving fine than I pulled up at home turns car off than my wife got into it to leave and it didn't wanna start no more
I have a 2003 Jeep Liberty I got a two and a half inch lift kit from BDS in the front and also in the rear with a 2in leveling kit. Do I need a extended spindle for the front to add the extra inch ...
My 07 jeep liberty had a missfire code on #4 turned out.to be a bad plugs that had not been changed in 8 years, 2hrs later the problem returend so i replaced the coi ,and i tested all the other one...
Bought a 04 Liberty. My son pulled the 4x4 lever when the car was off, I had put it back down and didn’t think it was a big deal. After that while driving the Jeep shifted hard, lunged forward whil...
Search Jeep Liberty Questions
Jeep Liberty Experts
Related Models For Sale