Ford F-250 Questions Car Customization
I Have A 89 Ford F250 7.3 Idi With An Aftermarket Turbo And A C6 3 Speed Au...
I will probably need a new front drive shaft be cause my truck may be longer. But will the suspension be compatible on my frame?
I Have A 78 Ford 400ci With A 4 Speed Standard Tranny And I Am Trying To Co...
I was told that a zf5 speed standard tranny out of an 88 ford 351ci would bolt up but the bell housing is not even close to the stock bell housing would a zf5 tranny out of a 460ci bolt up?
Ford F-250 Lift
Hey, I've got a f250 xlt and I'm wondering how high can I lift it before putting wheel spacers
Will The Fuel Tank Out Of A 1994 E350 Fit In A 1994 F250 Diesel
trying to find a bigger fuel tank for my 1994 f250 deisel
Can A 460 Motor Fit A F-250 Transmision
have a 1992 F-250 with a 5.8 motor I want to swap the motor with a 460 will it bolt up to the original transmisin
Will A 1970 Ford 390 Fit A 1968 Ford F250
engine froze, am replacing it, but need to know if i can swap it out with a 1970 ford 390
Spark Plugs And Cats.
What is the best spark plug for '89 5.8l? and What is the best cats for the 5.8l for true duals? straight pipe after cats.
Going True Duals
I have taken my '89 F250 4X4, 5.8l to a few exhaust shops and everyone saying cant take out original cat even if replacing it with 2 new ones. why is that? and what will i need to do it myself? i wan...
How Many F-250 Came With A 460 Engine In 1996
I would like to no
Transmission Conversion
'89 F250, 5.8l 4X4. i have a 4 speed manual with 5th gear OD but can only handle towing up to 4000lbs stated in owners manual. im wondering if there is a aftermarket gear i can put in to have 5th gea...
Is It Possible To Find Information On How To Convert A 2001 Ford F250 From ...
A friend is looking into converting a truck from two wheel to four wheel drive. He would like to know ballpark how difficult / how much this can be. Are there any manuals that give instructions on h...
What Would Be A Good Choice Of Fuel Injected Motor To Replace My 360?
I have a 1972 Ford F250 with the original 360 engine. The motor sounds like it has thrown a rod, and in the event that it cannot be rebuilt I am trying to figure out my options. If I have to change th...
Engine Swao
I wanna drop a decent hp engine into my ford f250, it's already got the 460 big block but it's efi and there's not much I can do with that they don't offer to many mods for it. My question would be...
Going From A 302 To A 351 Cleveland
Went from a 302 points ignition to a 351 Cleveland electronic ignition module. Is there some kind of wirehardness available that will replace my old wire hardness on my truck as its lacking conne...
Drive Trains And Old Trans?
Would my 98 ranger 4.0 v6 rwd automatic drivetrain work with a 79 300 straight six motor and manual transmission if I were to install the engine and trans in the ranger
Ford F-250 1977 Won't Start
I have a 1977 Ford F-250 with a 460 in it it cranks but won't start it has spark and fuel getting to the crab. Anyone could up!? Been stuck on this for awhile now thanks, much appreciated!
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.