Ford Bantam Questions Maintenance & Repair

Oil Cooler

Hi, have a 2003 1.8 Deisel Ford Bantam Endura De. The oil cooler is packing up and sourced a second hand part. Part fits but looks different. Part number 93FF-6B856-AA. Can I use this part? The old p...

Ford Bantam Rich In Fuel

135

FORD BANTAM ROCAM ALTERNATOR, BATTERY STARTING PROBLEM.

Hi guys and gals! I have a Ford Bantam 2006 1.3. Little bit of history: I have had her complete engine replaced approximately 4 years ago. I didn't do much driving for 2 years due to the main reason...

My Ford Bantam 2008

Hello is there maybe someone who can help me with advanced on my Ford Batam 1.3I 2008 My list of Problems 1:My bakkie is idling between 1200&3000 2:My bakkie is loosing its power well driving re...

Ford Bantum

Hi,i got a problem with my car ford bantam rocam engine,when i taking the terminals the car goes off immediately,I've tried to replace new carbon brushes but still the alternator doesn't supply th...

Radiator Fan Problem

It's turning immediately after starting the engine

Car Problem

Hi I have a ford bantam rocam and I just changed a gear box but with an old working one and I can't hear the fuel pump run the sound of it when I turn on the key I used to hear the sound of it, I che...

Gurus I'm Using A Bantu Bantum Rocam 1.3i If The Coil Pack Screws Are Not T...

Gurus I'm using a bantu bantum rocam 1.3i if the coil pack screws are not tight is it possible no spark on leads

Rocam Ford Tappetcover Crack

Hi. My 2006 Ford Bantam Rocam tappet cover cracked on the timing chain side. Anyone came across this before? Any reason for this? All info very much appreciated.

Ford Bantum 1.3 Have Sparks And Petrol But Not Starting

Too much petrol but not starting

Ford Rocam Not Starting

Hi guys it's me again 1.3 rocam 2007 car was not cranking but batry oil and hand brake lights all on checked all fuses and a fuse below fuse box seems to have been an issue 10amp fuse I replaced a...

Starting Problem

Hi my car have a starting problem n tha light next to clock stay on / not flash

Engen Problem

Hi guys I have rocam 2007 1,3 from yesterday car stopped starting but all the lights come on on the dash tried to kick start nothing the light just all go off if I continue trying to kick start ple...

Dash Lights And Spedo Dies

Hey guys i have a ford bantam 2010 model when hiting the brake everything on my dash dies when releising the brakes everything comes on again what can be wrong plz need help

Power Supply

Hi.. Please help i have a buntum rocam 1.3 i tried to bridge the fan to kick when i turn the key on from the coil but ever since its not turning on nothing no sign of power from the gadges I'm fru...

Red Light Not Coming On At Digital Clock. Ignition On But Not Cranking

Difference Between Right And Left Shaft

Hi

Don't really known help

MISFIRE

Hi I have a rocam 2011 it starts and idles nicely but when I drive it misfires and hold back almost as if the engine wants to cut off...

Bantam 2007 1.6 Rocam Will Not Start

I have spark, fuel pressure and engine cranks. I have swapped starter relay. Fuel pump inertia switch has been disconnected and bridged. Tested the NTC temp sensor. All is working as it should. An...

Own this car?

Share your experience with others.

Ford Bantam Experts

  • #1
    Guru97FK8
    Reputation
    15,160
  • #2
    Janus Welgemoed
    Reputation
    1,140
  • #3
    MrRocket12
    Reputation
    1,120
View All

Know more, shop wisely

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.