Chevrolet Chevelle Questions Maintenance & Repair
- Recently Active
I broke down on the motorway last week and the engineer said it was the crank shaft sensor so I had it replaced and the problem is still going on. The problem happens intermittingly
Want to lower front on 01' Cabby only a little. I already have Koni Str.t's to install. Would gti springs do the job?
My 2003 grand Marquis just started making a ticking noise ND now my car is not putting out all the power could it be my oil pump went out
I can't get to one of the bolts to get the coolant reservoir out ! How do I get to it ?
My 1990 Legend Coupe Manual had it's original clutch replaced at around 225k miles. About a month after that, I have this strange vibration and noise. The vibration can be felt thru the gear shifter ...
My van stalls if idles very long or motor gets up to temperature and I shut ithe off won't start tIl it cools off then have a hard time starting it. When does start it backfires somewhat a bit!! Th...
Neautrl. Puy scanner on it and got a bunch of tranny codes. Input shaft sensor, output shaft semsor, gear selection sensor. Basically all the tranny sensors now causing codes. Any ideas?
Search Chevrolet Chevelle Questions
Chevrolet Chevelle Experts