Austin-Healey 3000 Questions Any type
- Recently Active
I recently acquired an Austin-Healey 3000 Mki and looking for someone to help me keep it in shape and running. Ideally, want someone with prior experience of working on this (or similar) cars.
I have an Austin Healey 3000 kit car. The car has not been driven at excess speed, and primarily on local highways.
I have a 1962 bt7. Mine does not have roll up windows, I understand the 1963's do have roll up windows. Does anyone know if '63 doors will fit a' 62 exactly? Thanks, Gary
I have a 1966 Austin Healey 3000 which had a new clutch installed 10k ago. The car has been sitting for a while. We have new brake system, fluids etc. The clutch started slipping. What should I do? Th...
I have restored my BJ7, MK11, 3000 over the last 7 years. I have one problem, the car since I brought it out, It will run fine for 30 to 40 miles and then feel like its running on 3 cylinders. I have...
I recently inherited my dads car. I was having issues getting the car into gear. I would be able to drive for awhile and then slowly come to a stop sign and then putting it into first would cause ...
We found a casting number on the side of the block: AEC 881 We also found a tag on the left side of the engine: 29E/50-H2410 Also, a stamping on the rear end pumpkin: MCWCG. Not to sure about th...
A new front headlamp was installed and it works on low beam but goes out completely on high beam. Any suggestions or remedies? Thanks. DanL
I'm looking into purchasing a 1963 3000 mkII,the steel fenders were replaced with fiberglass..all 4. They look great,the only way I could tell was there was no seam under the headlights.The car will b...
I want to pull out the old single master cylinder and replace it with a duel unit. Who sells a compatible unit?
67 BJ8 that suddenly quits running after fill-up. Replaced most electrical and boiled gas tank. After a few hours, starts again. Any suggestions?
Search Austin-Healey 3000 Questions
Austin-Healey 3000 Experts