All Car Questions
- Recently Active
looking to buy a 1994 ford ranger 4x4, but might have a possible head gasket problem, looking for a price on repair.
i replaced both cv joints, both control arms ,engine mounts,but it still makes knocking noise what could it be it does not make the noise when driving but when in park with car running and turning t...
I have a 2000 t&c 3.3ffv I was fixing some leaky hoses behind the alternator and I forgot to disconnect the ground. I shorted the positive wire on the alternator with the nut on a breaded ground from ...
I have changed the bulbs and I still can't get the rear signals to work. Help Jaguar xj8 2001
should i put antifreeze in for this or what I am a lady with no male help and I dont know what to do
This has happened briefly twice in the last two short trips. I am about to drive a longer trip but would like a bit more info. It is also the weekend and Volkswagen aren't open. Any leads appreciated?
1989 Chevy Blazer, just had complete service performed 2 weeks ago. For the first time, my "check gages" light came on. I noticed the oil pressure was zero. Never saw this before. I check the oil (a...
eat blows cold air all the time
the car starts up runs for five minets then dies out .Wait for five minets start car back up it runs for 5 minets then dies out.keeps repeating the same thing .need help to fix this problem.Need help ...
drivers side electric door lock and inside handle will not open door. must put window down and reach out side to open door. Inside handle feel like lever broke or rod came off. Is there a diagram ava...
How much oil should I use and what type ,for the Toyota CAmry LE2010?
The fuelpump relay is cutting out the engin, why will it get hot.what can be the problem.
got engine code p0106, and replaced air flow sensor-light still on
2002 chevy tracker 6cyl
Radiator, thermostat and cooling sensor have been replaced. The fans will not turn on. The car is still overheating.
The left headlight has been dim for a while and if you pressed on the bulb housing it would get bright and we would put some electric tape to hold it. Eventually it dimmed again and stayed that way....
Track new questions that interest you