I have a 96 Ford Ranger which will not shift. Replaced the clutch, slave and master and grease Eric
3 Answers
ericvonzipper answered 9 years ago
This is EricVonZipper and the lines have been bleed and there was ok pressure.
Jacob answered 9 years ago
if it is the gear box 9/10 its just sinchros, get it rebuilt... a friend of mine had the tranny from his 94 5 speed rebuilt for roughly $500, try not to get a used tranny unless you are able to test it in a truck yourself, buying used is a gamble while if you rebuild you know what you have
Your Answer
Related Questions
-
I have a 96 Ford Ranger which will not shift. Replaced the clutch, slave and master and grease Eric 3 answers
several garages have looked at it. Need to figure out if it is the transmission or not? 280K miles on it. Thanks
1996 Ford Ranger XLT Standard Cab SB
-
Maintenance & Repair
-
I have a 2002 Ford Ranger and it will not turn over, 6 answers
I have a 2002 Ford Ranger and it will not turn over, starter is good, power to the starter from the battery, fuses all good, ground is tight, battery is new, what could I be missing??
2002 Ford Ranger
-
Maintenance & Repair
-
I have a 96 Ford ranger, 4 cylinder manual and have a problem I can't figure out. I can start the truck every time with no problem it isles great and I can sit there and rev it all day no problem but if I go to drive it I can make it about 1/2 mile and then that's it, ill press the gas petal and it won't do any thing but kill the gas (no gas) but soon as I take my foot off the gas it will idle just fine and rev fine but won't go anywhere unless I let it sit for a few mins and it will start all over. I have replaced the IAC, TPS and today the external fuel filter that was clogged but same thing. Once in a while if I push the clutch in it will stay at a rev for a sec. Please help 3 answers
96 Ford ranger need help :(
1996 Ford Ranger XL Standard Cab SB
-
Maintenance & Repair
-
My 1989 Ford Ranger 4X4 will not move if I put it in Overdrive. I can manually shift through all the gears including overdrive, but if I have to stop and start back off in overdrive, it will not move. 4 answers
My 1989 Ford Ranger 4X4 will not move if I put it in Overdrive. I can manually shift through all the gears including overdrive, but if I have to stop and start back off in overdrive, it will not move ...
Ford Ranger
-
Maintenance & Repair
-
96 ford ranger clutch will not engage 2 answers
with engine running I can shift into any gear without using the clutch, absolutely no clashing of gears. I don't think the clutch disc has burned out. is there any fix without splitting the unit
1996 Ford Ranger XLT Extended Cab 4WD SB
-
Maintenance & Repair

Looking for a Used Ranger in your area?
CarGurus has 4,571 nationwide Ranger listings starting at $1,895.
Shortcuts
Search Ford Ranger Questions
Ford Ranger Experts
-
#1tennisshoesReputation1,590
-
#2F_O_RReputation1,060
-
#3Bob BeamanReputation1,020
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.