hello , I have a '96 nissan altima, and i'm wanted to know is a spindle the same as a wheel hud assembly, cause i have 3 studs on one-side

hello , I have a '96 nissan altima, and i'm wanted to know is a spindle the same as a wheel hud assembly, cause i have 3 studs on one-side 1 answer

I have a 2002 Nissan Altima 2.5 and there is a sensor mounted on the radiator support bar. Want to know what it is. 10 answers

It is a 2 wire connector

Hello! I have a 2006 Nissan Altima. For about a few weeks, the brake and battery light has been going on. Today as I was driving, I couldn't accelerate. I got into the quickest parking spot 3 answers

And put it in park, and it accelerated, and the brake and battery light came on again. I shut the car off and went to start it again, and it wouldn't turn over. Yet, the radio could go on, and th...

I have a nissan altima 2004 and recently it only starts when the engine is cold 1 answer

When I was diving for an hour, I parked and shut down the engine, immediatly I wanted to start the car but didn't start. The next day when the engine was cold it started fine, and this has happene...

I have a 2008 Nissan Altima 1 answer

and sometimes when I am at a full stop at a light or corner and when I depress the gas pedal it sometimes doesn't respond, so I put it in neutral and tap the gas pedal and when she winds down I put ...