I have a 1997 thunderbird it was misfiring and the intake had a crack in it so I tore down the top end and the head that was misfiring is burnt along with the cam

I have a 1997 thunderbird it was misfiring and the intake had a crack in it so I tore down the top end and the head that was misfiring is burnt along with the cam 3 answers

My 96 Ford Thunderbird will not engage any gear including neutral no matter where the shifter is. It is stuck in park. I was wondering what are the problems that could cause this? I am hoping that is just a disconnected cable. Please help, my car is just not worth a new tranny and I have to be at work tomorrow morning. 4 answers

It drove and shifted fine on and off the freeway. When I got to my destination I put it in park and did not even shut it off. When I went to leave the shifter handle felt way loose. It did not click...

2003 Ford Thunderbird ,I bought this new ,it has 72,000 miles on it.my problem is that while at a car was,in line, the brake pedal went to the floor, did bump other car ,also happened two years ago , 1 answer

the pedal dose not seem to as high as it used to be.the only brake work done is front brake pads,I suspect its the master cylinder,what do you think...

I have a 2003 Ford Thunderbird. It has been sitting all winter in the garage and I forgot to start it. Now, when I start it, it starts quickly then shuts down quickly and the horn blows. 2 answers

The steering wheel moves, the door locks work, the dials on the dash work, but the engine shuts down and the horn blows. I have charged the battery. What could it be?

I have a 1992 Thunderbird. It will no longer change from 2nd gear to 3rd gear. I found a plastic piece or part in the transmission pan. It wasnt attached to anything. It has an O-ring around it and was beige. Do you know what this can be? 3 answers

I have a 1992 Thunderbird. It won't change gears from 2nd to 3rd anymore. And I found a beige plastic piece or part in the transmission pan, and it has an O-ring around it. Do you have any idea what...