Where exactly are the heat/air blender unit and the vacuum lines?
3 Answers
5BIGMDGUY8 answered 7 years ago
Thank you, papa. I've read of pulling the radio and observing the 'white' box revealed behind it...I've read where someone indicated it was actually behind the firewall proper and while you could see it, you could reach up in there and feel for it. Not much help when taken in preponderance -- 3 different locations...great! lol I guess I'll try all three.
papa answered 7 years ago
their are 3 of them start at fender up at firewall,if cracked or soft replace,their is also a 3 prong round valve the vac lines hook into,they go bad,replace that to,can be found at any parts store in the help section,pulling the radio is a waist of time,the valve behind it works off the vacume lines it never goes bad and the line that goes to it is clear plastic,which is not exposed to the elements such as heat, moisture,if you were to see it ,it would still look new.
Your Answer
Related Questions
-
Where exactly are the heat/air blender unit and the vacuum lines? 3 answers
1998 Ford Windstar 3 Dr GL Passenger Van
-
Maintenance & Repair
-
how do I properly route vacuum lines to heat valves? 1 answer
My heat & cooling system only emits air as if in defrost position. I need a picture or diagram of the vacuum lines.
1996 Ford Windstar 3 Dr GL Passenger Van
-
Maintenance & Repair
-
My 2002 windstar only blows heat through the defrost. 2 answers
Tranny was replaced and van came back this way. Repair shop said it was not anything they did. Is there a vacuum line that could be off. Any ideas would help! No matter what position the dial is in t...
2002 Ford Windstar SEL
-
Maintenance & Repair
-
Why won't my 2002 Ford Windstar start? I have replaced the mass air flow sensor and the air filter, could it be the fuel filter? 1 answer
It has new sparkplugs, air filter, new battery, it has spark, it is getting gas, and it has air. I put a code reader on it, and it says no codes. Any ideas??
2002 Ford Windstar LX
-
Maintenance & Repair
-
Air selector on works with the frond dashboard vents. 2 answers
Heat and A/C works fine. Blower works fine. But the only air outflow is from the dashboard vents.. not the floor ... not the defrost. Anyone out there that can steer me to a motor driven air valve tha...
1996 Ford Windstar 3 Dr GL Passenger Van
-
Maintenance & Repair

Looking for a Used Windstar in your area?
CarGurus has 361 nationwide Windstar listings and the tools to find you a great deal.
Shortcuts
Search Ford Windstar Questions
Ford Windstar Experts
-
#1JohnBarJBReputation610
-
#2T_S_TReputation470
-
#3Tom DemyanReputation440
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.