2 pin electrical plugs, aft side between friewall and the engins. 3.0 OHV
I rebuilt a '98 3.0 ohv engine I had received from relatives w/ a blown head gasket. Running fine now. Check engine light code indicated aft heated O2 sensor open. I have changed both, but after doing so, a two pin connector has come loose coming off the same harness section as the heated aft O2 sensors, just a little higher up. The pin cover is flat on one side and oval on the other,...not completely round or oval or even rectangular. It has come loose as the clip is broken. Seeking location as I can not seem to find where it goes. Guessing right side aft engine low as the wiring harness for that section isn't very long. ( aft meaning looking at the motor from the front of the car ). Any ideas,...and thanks for ANY help.
Search Mercury Sable Questions
Mercury Sable Experts