air in abs controler
New hubs, rotors, break lines, pads & calipers. Bleed lines on all 4 corners,
soled pedal, until starting motor & then no pedal?
The ABS system control needs to be bled out from air by a computer. Have to find a shop capable of bleeding the ABS unit.
Having the same exact problem with me nissan frontier. It can only be two things, leak in the lines or air in the system. If there's air in the abs module it'll need to be blead by a dealership technician. The use a computer to open and close certain valves in side it to bleed it
The HCM has air in it, if you don't have an IDS-VCM to open the valve your wasting your time. System needs to be bleed.
Anyone can build a circuit board for UART serial protocol if your into electronics check out raspberry pi
Looking for a Used Mountaineer in your area?
CarGurus has 1,434 nationwide Mountaineer listings starting at $650.
Search Mercury Mountaineer Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Mercury Mountaineer Experts