2002 Milly S with 52k miles. ABS/Brake/TCS/TCS Off/ Hold lights on steady.
2002 Milly S with 52k miles.
ABS/Brake/TCS/TCS Off/ Hold lights on steady.
Speedometer/odometer stopped working at same time lights came on.
Done so far:
replaced VSS sensor.
Checked/cleaned all grounds.
New silicone vacuum lines on all valves/rear bank. Have not done lines on top of motor yet.
Swapped in used ABS/Trans controller (under drivers side dash).
Current codes: P0500, P1720, P1524, P1455
No ABS specific codes. Need to have these checked again. Don't have abs code reader.
try disconnecting the negative cable, pressing the brake five times and reconnecting the cable, this may reset the codes which seem to be largely a matter of speed sensing and vss type business, could just do with a reset~
Search Mazda Millenia Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Mazda Millenia Experts