!999 ford taurus speed sensor
My grandson bought this car which gave us a speed sensor code. We
replaced it,but it did the same thing no speedometer and shifting problems.
The Haynes Manual said the two wire sensor one should have1.5 volts with the
ignition key on,but we only get .65 volts. Is this are problem.
You need the 1.65 volts for the sensor to respond correctly. It seems that you may a bare wire. Follow the wiring back and check for any cracks or rubbing in the wires.
Two top answers may be similar to your question on page one of google search: 1. https://youtu.be/OoPKhl2p6ao 2. http://www.carrestorationshop.com/1999_ford_taurus/q1546752- engine_cooling_problem_999_ford_taurus_6 Google search "speed sensor location !999 ford taurus" for many answers
We checked it back to the fuse panel under the dash, it is still registering .64 volts, but we are still looking. Thank ,you
It was hesitating and ideling a little off. So I took it in. They did a tune up and changed the manifold gasket. I left and it was still doing the same thing. Now they think it is that sensor
Looking for a Used Taurus in your area?
CarGurus has 15,520 nationwide Taurus listings starting at $915.
Search Ford Taurus Questions
Ford Taurus Experts